ChipEncoder

The miniature surface mount ChipEncoder is a reflective optical encoder that makes high-accuracy motion feedback feasible where it would have been physically impossible or simply too costly. It is cost-effective for OEMs with volumes of 500 or more per year and has all the benefits of an integrated circuit: chip-sized packaging, cost savings through integration with customer electronics, and compatibility with automated manufacturing equipment. Plus, the ChipEncoder is RoHS compliant.

ChipEncoder products measure just 7mm by 11mm, so they fit in spaces too tight for any other encoder. They have up to 1000 times more resolution than competitive devices: 3,000 to 327,000 quadrature counts per revolution or 10 microns to 1 micron per quadrature count (2,500 to 25,000 quadrature counts per inch). Plus, the three-channel differential output includes an index. Finally, one model works in both linear and rotary designs.

You’ll enjoy flexibility, as well. Designed for automated manufacturing, the ChipEncoder is compatible with pick and place and solder reflow systems. Most importantly, it requires no alignment following the final assembly. So, if you need higher resolution, lower manufacturing costs, or you simply have to add low-cost motion control, the ChipEncoder is your best solution.

For higher performance – up to 67 Million counts – or an EMI-shielded encoder with a cable and connector, consider miniature Mercury encoders; for applications requiring cut-to-length tape scales or the highest resolution and accuracy, consider Mercury II encoders.

ChipEncoder Part Numbers

 

ChipEncoder Datasheet

CE300 ChipEncoder Installation Manual

ChipEncoder Interface Drawing